Whether stamping parts or metal stamping parts are in use, if they are not used carefully or if they are not maintained in place, they may be damaged. These are things that often happen. The key is how we should reduce the occurrence of these situations. In fact, there is a feasible method. Metal stamping is sometimes called sheet forming, but there is a slight difference. simply put. Metal stamping is the use of punches and molds to iron. The industry must know: the difference between stampings and castings, aluminum, copper and other plates and heterogeneous materials make them deform or break to achieve a certain shape and size. The stamping parts industry is an industry involving a very wide range of fields, which goes deep into all aspects of the manufacturing industry. In foreign countries, stamping is called sheet forming.

Measures to prevent damage to metal stamping parts:

1. The model, specification and performance of the hardware fittings should conform to the national standard and match the plastic steel doors and windows.

2. For sliding windows with a width of more than 1 meter, or installing double-glazed doors and windows, and gardening hardware stamping parts, it is advisable to install double pulleys or use rolling pulleys.

3. The sliding support hinge shall not be made of aluminum alloy, but shall be made of stainless steel.

4. When installing hardware with fastening screws, a metal lining plate must be installed inside, and the thickness of the lining plate should be at least twice the pitch of the fasteners. It must not be fastened to plastic profiles. What does China's stamping industry look like, and non-metallic linings must not be used.

5. Hardware accessories should be installed before completion. Door and window locks, handles, etc. should be assembled after the window and door leaves are in the frame to ensure the correct position and flexible switching.