Things to pay attention to when buying hardware stamping parts: carefully observe whether the appearance is rough, and then slide the switch by hand to test several times to see whether it is sensitive and whether there is abnormal noise. Don't compare with furniture hardware, but need to compare with similar products. It depends on the materials. The materials used are relatively good, and the manufacturer has a long operating history and high credibility as much as possible. As far as the quality identification of hardware accessories is concerned, the product can be identified by its feel, smoothness, matching gaps, etc. Users with conditions should purchase hardware accessories manufactured by regular manufacturers, because most regular manufacturers use mold processing. The products are characterized by high precision, good dimensional consistency, and standard processing technology. Decorative cabinet hardware accessories, such as cabinet handles, should be considered in harmony with the color and texture of the furniture. It is not advisable to use solid wood handles for the handles of the cabinet, otherwise the handles will be easily deformed in a humid environment. For solid wood cabinets, you can choose antique handles. There are products made of zinc alloy and other materials, and engineering plastics are pressed by molds. The patterns on the surface can be made very meticulous and delicate, and the surface is treated. , It can be matched with wood, and the effect is very good.

       Therefore, before purchasing hardware accessories, the relevant reference materials that can be mastered or understood, for consumers, they can not only choose hardware accessories that meet their own needs, but also enjoy high-quality life pleasure. The design of the metal stamping parts factory should not only ensure good performance, but also have good process performance to reduce material consumption, extend mold life, increase productivity, reduce costs, and ensure the quality of stamping parts. Compared with castings and forgings, metal stamping parts have the characteristics of thinness, uniformity, lightness and strength. Stamping processing can produce workpieces with stiffeners, ribs, undulations or flanges that are difficult to manufacture by other methods to improve their rigidity. Due to the use of precision molds, the accuracy of the workpiece can reach the micron level, and the repeatability is high, the specifications are consistent, and holes, bosses, etc. can be punched out.

       Mold design and manufacturing require more time, which prolongs the production preparation time of new metal stamping parts. Standardization and development of mold bases, mold bases, guides and simple molds (for small batch production), composite molds, multi-station progressive molds (for mass production), and the development of rapid mold change devices, which can reduce the workload of stamping production preparations And shortening the preparation time can make it suitable for reducing the amount of preparation for stamping production and shortening the preparation time, so that the advanced stamping technology suitable for mass production can be reasonably applied to small batch and multi-variety production. In addition to the hydraulic press for forming thick plates, the stamping equipment generally uses mechanical presses. Conveying and other machinery, as well as a mold library and a quick mold change device, and controlled by a computer program, can form a high-productivity automatic stamping production line. In the case of producing dozens or hundreds of metal stamping parts per minute, the processes of feeding, stamping, discharging, and discharging waste are completed in a short period of time, and accidents of personal, equipment and quality often occur.

       Safety production in the stamping of metal stamping parts is a very important issue. Generally, in the stamping process, the temperature of the workpiece will rise quickly during the stamping process, especially in the cold forging stamping process, and it must be lubricated with lubricating products. If lubrication is not used, it will be stamped directly, welded-assembled, and there is no oil on the surface. The parts are easy to weld and assemble. Metal stamping parts are parts that can be processed by stamping, bending, stretching and other means. A general definition is-a part with a constant thickness during processing. Metal stamping parts are widely used in various fields of our lives, including some electronic devices, auto parts, decorative materials and so on.